To AudioQuest Brave Heart Full-Range ειναι καλωδιο ηχειων, με στιλβωμενο χαλκο υψηλης καθαροτητας, παχους 2x2,99mm2. Διαθετει μονωση απο γραφενιο και carbon και ενεργο συστημα καταστολης ραδιοπαρεμβολων 72v DBS.

Οι τιμες αφορουν σε τερματισμενα καλωδια με standard plugs , μπανανες η διχαλα σειρας 1000 series silver

Εγγυηση* Αντιπροσωπειας. Δυνατοτητα δοσεων.

*Εγγυηση εφ ορου ζωης εφ οσον υπαρχει η συσκευασια του.

Physically, Brave Heart is nearly the size of AudioQuest's Mythical speaker cables, just 0.6mm smaller OD. Internally, it has almost a third more of the same superb Perfect-Surface Copper+ conductor metal as used in previous models, making it a slightly junior Mythical Creature. Yet, Brave Heart is more physically manageable because it houses positive and negative sides in separate round constructions.

Brave Heart's larger overall size results in more “torque”—a sure and muscular grip on the music, especially the bottom end. Damping-factor is better preserved over length, especially benefitting speakers with very low impedance at some (often bass) frequencies and speakers with ported (4th-order) enclosures that rely on strong amplifier control to perform their best.

Brave Heart also uses upgraded polypropylene insulation, which linearizes and expands the bandwidth of its noise-dissipation. With conductors that are farther apart thanks to optimized insulation, the out-of-focus, harsh-sounding effect of distributed capacitance distortions are meaningfully reduced. Finally, thicker layers of Carbon-Loaded PVC, newly added Graphene, and 4% silver shield drain wires further improves RF-Noise Dissipation.

All this, plus a wealth of proven AudioQuest design elements: Solid conductors prevent strand interaction, and, because the conductors are direction-controlled, RF noise is efficiently drained away from the vulnerable amplifier circuitry—toward where it will do the least or no harm. To further minimize the negative effects of induced RF-noise and timing errors due to dielectric noise, Brave Heart includes AudioQuest's 72v Dielectric-Bias System. There is no RF-relaying metal in the cable dressing, breakouts, or plug barrels, and the cold-welded gas-tight connections are made to Red Copper spades or bananas.

Technology

• ZERO-Tech (No Characteristic Impedance): The only way to prevent characteristic-impedance mismatch-effects between a cable and its attached source and load circuits is for the cable not to have a characteristic-impedance. ZERO-Tech accomplishes this by eliminating any electrostatic field between the cable’s high and low signal conductors — enabling uncompressed current transfer. All-important transient current is unrestricted, and RF-Noise Dissipation is linearized (consistent octave to octave).
• Solid Perfect-Surface Copper+ Conductors (PSC+): High-purity PSC+ conductors prevent strand interaction, a major source of ear-fatiguing transient intermodulation distortion. The astonishingly smooth and pure PSC+ further eliminates harshness and greatly increases clarity compared to OFHC, OCC, 8N and other premium coppers.
• Level 7 Linear Noise-Dissipation: The Earth is permeated with RF-Noise from satellites, cellular, WiFi, etc. Brave Heart’s Graphene+Carbon Mesh-Network, ZERO-Tech, direction-controlled metal, 72v DBS, and silver-plated shield drains effectively minimize damaging RF-Noise.
• 72v Dielectric-Bias System (DBS) with RF Noise-Trap: Insulation is also a dielectric that acts like a shunt-filter. Biasing the dielectric both minimizes dielectric-noise and linearizes the filter, significantly improving wide-bandwidth dissipation of induced noise.
• 4% Silver Shield Drains: Significantly aid in the efficient dissipation of RF-Noise.
• Cold-Welded Red-Copper Spades or Bananas: Cold-Welding avoids the introduction of heat and distortion-causing materials like solder. The bare parts are submerged (hung) in silver instead of tumbled in a lower-grade solution. Speaker breakouts and plug casings are synthetic, not metal, to avoid inducing RF Noise into the conductors.
• Directionality: All drawn metal strands or conductors have a non-symmetrical, and therefore directional, grain structure. AudioQuest controls the resulting RF impedance variation so that noise is drained away from where it will cause distortion. A fundamental aspect of AudioQuest’s multifaceted Noise-Dissipation technology, Direction-Controlled Conductors ensure induced noise is dissipated and drained properly.

Specifications

• Metal Solid Perfect-Surface Copper+ (PSC+)
• Gauge 2x 2,99mm2
• Geometry ZERO-Tech (No Characteristic Impedance)
• RF Drain Metal Solid 4% Silver
• Jacket Red on Black Nylon Braid
• Noise-Dissipation Graphene+Carbon Mesh-Network