Audio-Technica AT-OC9XEN

Η Audio-Technica AT-OC9XEN ειναι κεφαλη κινητου πηνιου (Dual Moving Coil), χαμηλης εξοδου, με ελλειπτικη βελονα. Εξοδος 0.35mV

Τιμή Καταλόγου: 429.00€
382.00€

Διαθεσιμότητα: 4-10 ημέρες

ΔΩΡΕΑΝ ΑΠΟΣΤΟΛΗ ΣΕ ΟΛΗ ΤΗΝ ΕΛΛΑΔΑ

Η Audio-Technica AT-OC9XEN ειναι κεφαλη κινητου πηνιου (Dual Moving Coil), χαμηλης εξοδου, με ελλειπτικη βελονα. Εξοδος 0.35mV

The Next Generation of the legendary OC9 cartridge series.The Audio Technica AT-OC9XEN MC cartridge from the OC 9 product line replaces the AT-F7. Since its introduction more than 30 years ago, Audio-Technica’s pioneering moving coil OC9 cartridge series has been prized by demanding vinyl listeners and professional critics alike for its musical transparency, expression of sound and precise construction. Featuring a square shank for accurate stylus alignment and nude diamond for increased fine detail retrieval.

Features

  • Low mass nude elliptical stylus and aluminium cantilever
  • A neodymium magnet and pure iron yoke provide increased magnetic energy
  • Threaded inserts in the cartridge body enable the cartridge to be mounted on to the headshell or integral tonearm with just two screws – no nuts required 
  • Aluminium body minimizes unwanted vibration for reduced resonance and a superior audio reproduction
  • Pure Copper by Ohno Continuous Casting process (PCOCC) is used for the coils to achieve the purest signal possible

Specifications

  • Model AT-OC9XEN
  • Mounting 1/2” centers / Threaded inserts
  • Frequency Response 20 - 30,000 Hz
  • Body Material Aluminium
  • Channel Separation 25 dB (1 kHz)
  • Output Channel Balance 1.5 dB (1 kHz)
  • Output Voltage 0.35 mV (@ 1 kHz, 5 cm/sec)
  • Vertical Tracking Angle 20 degrees
  • Vertical Tracking Force Range 1.8 to 2.2 g (standard 2.0 g)
  • Stylus Shape Elliptical Nude
  • Stylus Size 0.3 x 0.7 mil
  • Stylus Construction Nude square shank
  • Cantilever Aluminium pipe
  • Coil Impedance 12 Ohms (1 kHz)
  • Coil Inductance 25 μH (1 kHz)
  • DC Resistance 12 Ohms
  • Static Compliance 20 x 10 – 6 cm / dyne
  • Dynamic Compliance 9 x 10 – 6 cm / dyne (100 Hz)
  • Terminal Pins Brass
  • Wire Used for Coil PCOCC (Copper by Ohno Continuous Casting process.)
  • Recommended Load Impedance Min 100 Ohms
  • Cartridge Weight 7.6 g
  • Dimensions 17.3 (H) x 16.8 (W) x 25.7 (L) mm
  • Accessories Included 1 non magnetic screw driver, 1 brush, 2 washers, 4 pairs of mounting screws: 5mm, 8mm, 10mm, 12mm, 1 plastic protector

Σχετιζόμενα Προϊόντα

Σεβόμαστε την ιδιωτικότητά σας
Η ιστοσελίδα χρησιμοποιεί cookies για την καλύτερη εμπειρία πλοήγησης των χρηστών.
Τα απαραίτητα για τη λειτουργία του ιστοτόπου cookies είναι πάντα ενεργά, ενώ μπορείτε να αλλάξετε τις ρυθμίσεις για τα cookies που αφορούν στη συλλογή στατιστικών ή marketing.