Dali Alteco C-1 black

To Dali Alteco C-1 ειναι ενα διδρομο ηχειο , κυριως για χρηση σε συστηματα home cinema, ως ηχειο υψους σε συστηματα Atmos, DTS-X (επικαθημενο σε κυριως ηχεια η αναρτημενο στην οροφη) η ως surround αναρτημενο σε τοιχο.

Τιμή Καταλόγου: 458.00€
359.00€

Άμεση Διαθεσιμότητα

ΔΩΡΕΑΝ ΑΠΟΣΤΟΛΗ ΣΕ ΟΛΗ ΤΗΝ ΕΛΛΑΔΑ

To Dali Alteco C-1 ειναι ενα διδρομο ηχειο , κυριως για χρηση σε συστηματα home cinema, ως ηχειο υψους σε συστηματα Atmos, DTS-X (επικαθημενο σε κυριως ηχεια η αναρτημενο στην οροφη) η ως surround αναρτημενο σε τοιχο.

Εγγυηση Αντιπροσωπειας. Δυνατοτητα δοσεων.

The DALI ALTECO C-1 is truly a multi-purpose speaker. The perfect fit for adding height information to a surround setup or taking the role as an out-of-the-way stereo speaker. By designing the crossover for stereo use and by keeping a strict focus on DALI sound design principles, we have created a speaker that delivers believable height information from Atmos, DTS-X and Auro-3D movies.
DUAL SOUND MODE
The unique angular design combined with the dual sound mode enables this speaker to be used in a multitude of different scenarios. Choose 'UP' on the front baffle switch to beam the sound waves either straight out for a soft downwards angle, or by selecting 'DOWN', beaming the sound almost straight down for close position listening.

UP-FIRING
The angular design of this speaker makes it perfect for up-firing use. Combined with a surround receiver that has the ability to render height information (Dolby Atmos, DTS-X or Auro-3D), placing it on top of the front speakers, and even on top of the rear speakers will offer an excellent ceiling reflected rendering of height information in compatible movies and concerts.

WOOD FIBRE CONES
Our low-loss drivers uses a mix of low-mass paper cones with wood fibre reinforcement. The embedded wood fibres give the surface an uneven structure, which dramatically minimizes the resonance of the surface. This creates the best possible reproduction of every detail in the audio signal.

SOFT DOME TWEETER
The dome tweeter offers best-in-class resolution with an extended frequency response, wide dispersion and low coloration. A clear heritage from our high-end series. The tweeter is based on an ultra-lightweight weaved fabric, which weighs less than half of the market standard (0.056 mg/mm2)

Specifications

  • Frequency Range (+/-3 dB) [Hz]     74 - 25,000 Hz
  • Sensitivity (2,83 V/1 m) [dB]     83.0 dB
  • Nominal Impedance [ohms]     6 ohms
  • Maximum SPL [dB]     103 dB
  • Recommended Amplifier Power [W]     40 - 100 Watt
  • Crossover Frequency [Hz]     2,100 Hz
  • Crossover Principle     2-way
  • High frequency driver, Quantity     1 x 21 mm
  • High frequency driver, Diaphragm type     Soft Textile Dome
  • Low frequency driver, Quantity     1 x 4.5"
  • Low frequency driver, Diaphragm type     Wood Fibre Cone
  • Enclosure type     Closed Box
  • Connection Input     Single Wire (Spring loaded push button)
  • Recommended Placement     On-Wall
  • On speaker
  • Recommended Distance From Wall [cm]     1 - 100 cm
  • Dimensions (HxWxD) [mm]     265 x 160 x 200
  • Weight [kg]     2.9 kg
  • Accessories Included     Rubber Feet, Manual

Σχετιζόμενα Προϊόντα

Σεβόμαστε την ιδιωτικότητά σας
Η ιστοσελίδα χρησιμοποιεί cookies για την καλύτερη εμπειρία πλοήγησης των χρηστών.
Τα απαραίτητα για τη λειτουργία του ιστοτόπου cookies είναι πάντα ενεργά, ενώ μπορείτε να αλλάξετε τις ρυθμίσεις για τα cookies που αφορούν στη συλλογή στατιστικών ή marketing.