Spendor Classic 200

Το Spendor Classic 200 ειναι ηχειο δαπεδου , 3 δρομων με μεγαφωνα κατασκευης Spendor. Δεκτες ανταλλαγες. Δυνατοτητα δοσεων.

Τιμή Καταλόγου: 23400.00€
Ρωτήστε τιμή

Διαθεσιμότητα: 4-10 ημέρες

ΔΩΡΕΑΝ ΑΠΟΣΤΟΛΗ ΣΕ ΟΛΗ ΤΗΝ ΕΛΛΑΔΑ

Το Spendor Classic 200 ειναι ηχειο δαπεδου , 3 δρομων με μεγαφωνα κατασκευης Spendor .

Εγγυηση Αντιπροσωπειας. Δυνατοτητα ανταλλαγης, δοσεων.

The Spendor Classic 200 loudspeaker is an all-new top-of-line Spendor Classic. It is a 3-way system featuring two large 30cm (12 inch) Spendor woofers in an original Spendor 70’s style floor-standing enclosure. The Spendor Classic 200 delivers music with captivating clarity and real dynamics. It can fill the largest listening rooms with deep natural sound. For Spendor Classic 100 fans the Classic 200 an easy plug-and play upgrade.
 
For extended low frequency response, high power handling and minimal room interaction, the Classic 200 has a sealed (non-ported) enclosure with two specially engineered Spendor 30cm woofers. The bextrene plastic woofer cones use the same cone profile and material as our legendary ‘big’ Spendor BC3 Broadcast reference monitor.  Forty years on this cone still performs so well we found no reason to change it. However, to cope with high pressure and extended excursion at low frequencies, the new Classic 200 woofers have Kevlar composite stabiliser domes bonded to the bextrene cones. Our combination of a sealed enclosure and optimised woofers brings significant benefits at low frequencies. Extremely low group delay distortion preserves original ‘as recorded’ musical timing which is critical for a totally immersive and believable listening experience. As there is no resonant port output, room positioning is far less critical than with a conventional ported loudspeaker. You will be surprised how much this benefits vinyl replay, and it allows the Classic 200 to deliver great sound in a small room.
 
The Classic 200 has a new Spendor 18cm mid-range unit with EP77 polymer cone, cast magnesium alloy chassis, high efficiency motor system, optimised electro-dynamic damping, and excellent thermal dissipation. It delivers sound with a new level of clarity and dynamic range. High frequencies are handled by a 22mm wide-surround polyamide dome tweeter. In combination they deliver sound with outstanding coherence and definition over a wide deep listening area.
 
For the Classic 200 our Classic cabinet engineering has been refined to a new level of sophistication. The cabinet is constructed with thin lightly braced panels attached to a rigid front baffle. Critically dimensioned visco-elastic damping pads are bonded to each panel. At mid and high frequencies the cabinet produces virtually no audible movement, while at low frequencies the side panel are allowed to flex in harmony with the output from the woofers. This subtle synchronised movement adds a captivating warmth and charm to any music, which many listeners find irresistible. Each mechanically damped base has four levelling feet attached via forged steel inserts to hold the cabinet rock steady. The elimination of micro-vibration allows fine musical detail to be reproduced with delicate precision.
 
A meticulously refined crossover network with precision wound inductors and high-linearity plastic film capacitors integrates the drivers seamlessly in a minimum phase alignment. Excellent efficiency (89dB) and an easy to drive load ensure complete compatibility with all good amplifiers, from powerful solid state to the most esoteric tube designs.
 
Every critical component and every complete loudspeaker is calibrated to stringent broadcast reference standards. The SP200 is 100% UK designed and manufactured by Spendor.
 
Specifications:
  • Description                                      3 way floor standing loudspeaker
  • Enclosure type                                Thin walled, damped, braced, sealed
  • Input connection                             Three pairs gold plated precision binding posts links allow for single, bi or tri-wiring
  • Typical in-room response             20Hz - 25kHz
  • Power handling                               25-300 watts unclipped programme
  • Sensitivity                                         89dB for 1 watt at 1 metre
  • Nominal impedance                      8 ohms (min 6.2)
  • HF driver                                           22mm polyamide dome
  • Bass/mid driver                              180mm Spendor made EP77 polymer cone
  • Lower bass driver x2                     300mm Spendor made bextrene cone with Kevlar© composite stabiliser
  • Crossover frequencies                 550Hz, 3.8kHz
  • Net Weight                                       55kg
  • Height                                               1085mm (excluding feet)
  • Width                                                 370mm
  • Depth                                                 515mm (excluding terminals)
  • Finish                                                Cherry , Natural Walnut. Upcharge 20% for Natural Walnut Ti. (Special finishes, quoted on request) Plinth satin black
  • Accessories                                     Height adjustable spike feet, grille

 

Videos:

Σχετιζόμενα Προϊόντα

Σεβόμαστε την ιδιωτικότητά σας
Η ιστοσελίδα χρησιμοποιεί cookies για την καλύτερη εμπειρία πλοήγησης των χρηστών.
Τα απαραίτητα για τη λειτουργία του ιστοτόπου cookies είναι πάντα ενεργά, ενώ μπορείτε να αλλάξετε τις ρυθμίσεις για τα cookies που αφορούν στη συλλογή στατιστικών ή marketing.